If you’re having trouble with your Chamberlain Garage Door Opener 940EV, especially with the ETC (external transmit code) keypad, you might be wondering how to factory reset the system and reprogram it. The Chamberlain Garage Door Opener 940EV ETC Factory Reset Keypad process can sound complicated, but with the right steps and some basic knowledge, you can easily restore your garage access and security features.
In this comprehensive guide, we’ll walk you through the process of factory resetting the Chamberlain 940EV keypad, reprogramming access codes, and solving common keypad-related issues. Whether you’ve recently moved into a new home or simply forgot your PIN, this article will help you regain control of your garage door system quickly and securely.
Read too: Can You Upgrade a Chamberlain Garage Door Opener Keypad? Here’s What You Need to Know
Why You Might Need to Factory Reset the Chamberlain 940EV Keypad
Before diving into the reset steps, it’s essential to understand why a factory reset might be necessary.
Common reasons include:
- You moved into a home with a previously programmed keypad and don’t know the old code.
- You’re experiencing keypad malfunctions or intermittent response.
- You’ve lost access due to a battery reset or electrical disruption.
- You want to clear all previously stored PIN codes for better security.
A factory reset wipes all existing settings and gives you a clean slate for reprogramming the keypad and syncing it to your garage door opener.
How to Perform a Chamberlain Garage Door Opener 940EV ETC Factory Reset Keypad
Resetting the Chamberlain 940EV keypad is a simple process, but you’ll need to be near your garage door opener to complete it. Follow these steps carefully:
Step-by-Step Factory Reset Instructions:
- Locate the Learn Button:
- On your garage door opener unit (mounted on the ceiling), find the Learn button.
- It’s usually near the LED light and antenna wire.
- Learn buttons come in different colors (yellow, red/orange, purple), which correspond to the frequency your remote/keypad uses.
- Press and Hold the Learn Button:
- Press and hold the Learn button for approximately 6 to 10 seconds.
- The LED light next to the button will turn off, indicating that all remote controls and keypads have been erased.
- Wait 30 Seconds:
- Let the system clear out old codes completely.
- Reprogram the Keypad:
- Enter a new 4-digit PIN on the keypad.
- Press and hold the Enter button.
- While holding Enter, press and release the Learn button on the opener.
- Continue holding Enter for a few seconds until you hear a click or see the lights flash.
- Test the Keypad:
- After reprogramming, enter the new PIN and press Enter.
- Your garage door should now open or close, confirming successful reset and sync.
Tips for a Successful Reset
- Work quickly: The programming window after pressing the Learn button is usually 30 seconds.
- If you’re resetting multiple devices (like remote controls), do them all within that 30-second window.
- If your opener is in Learn Lockout Mode, wait 10 minutes before trying again.
Troubleshooting Common Issues With the 940EV Keypad
Even after a factory reset, you might encounter operational issues. Here are a few common problems and how to fix them.
1. Keypad Unresponsive After Reset
Possible Causes:
- Dead or low battery
- Corroded battery contacts
- Incomplete reset
Fix:
- Replace the 9V battery with a fresh one.
- Clean battery terminals.
- Repeat the factory reset process from the beginning.
2. PIN Code Not Working
Possible Causes:
- Wrong Learn button used
- Mistyped PIN during programming
- Device timed out
Fix:
- Double-check your garage door opener model and Learn button color.
- Reattempt programming and keep within the 30-second limit.
3. Keypad Works Intermittently
Possible Causes:
- Signal interference from nearby devices (WiFi routers, LED lights)
- Old or incompatible battery
Fix:
- Relocate other wireless devices.
- Use a new alkaline 9V battery (avoid rechargeable ones).
Programming Temporary PINs After Reset
The Chamberlain 940EV keypad allows you to set up temporary access codes, perfect for guests or delivery personnel.
How to program a temporary PIN:
- Enter your primary 4-digit PIN and press #.
- Enter the temporary 4-digit PIN and press Enter.
- The keypad will blink to confirm.
This secondary code can later be deleted by reprogramming the main code.
Changing an Existing PIN Without Resetting Everything
If you remember your old PIN but want to change it:
- Enter your old PIN and press #.
- Enter your new 4-digit PIN and press Enter.
- The light should blink, confirming the new code is accepted.
No need to go through the full factory reset process in this case.
When Should You Replace the 940EV Keypad?
While factory resetting is a great solution for most issues, there are times when replacing the keypad is the smarter move.
Consider a replacement if:
- The buttons stick or don’t respond even after cleaning.
- The unit shows signs of water damage or extreme wear.
- You’ve reset multiple times without lasting results.
Luckily, the Chamberlain 940EV keypad is affordable and compatible with many garage door openers, including LiftMaster and Craftsman models that use Security+ technology.
Security Tips After a Factory Reset
Once your Chamberlain Garage Door Opener 940EV ETC Factory Reset Keypad is reprogrammed, take these additional steps to protect your home:
- Use a non-obvious PIN, avoiding patterns like 1234 or 0000.
- Change your code periodically, especially if you’ve shared it.
- Consider using MyQ Smart Home integration for monitoring and remote access.
FAQs
Q: How long does the battery in the 940EV keypad last?
A: Typically 1–2 years depending on usage. Always use a high-quality 9V alkaline battery.
Q: Is the 940EV weatherproof?
A: Yes, it’s designed to withstand outdoor conditions but should be shielded from direct rain or snow.
Q: Can I use the same keypad with multiple openers?
A: Yes, the 940EV can be programmed for up to three garage door openers.
Q: Does factory reset delete remote controls too?
A: Yes, all paired remotes and wireless keypads are erased when you reset via the Learn button.
Final Thoughts
The Chamberlain Garage Door Opener 940EV ETC Factory Reset Keypad process may seem intimidating at first, but with the right guidance, it becomes a straightforward and empowering solution for any homeowner. Whether you’re dealing with forgotten PINs, new home setups, or general troubleshooting, knowing how to reset your keypad can save you both time and stress.
Remember to always test your system thoroughly after resetting and take proactive steps to keep your system secure and well-maintained.
If your keypad still doesn’t work after following these steps, it may be time for a replacement keypad or professional inspection of your garage door system.
Leave a Reply